Home │ School Page
Location： 首页 > English > Scientific Research > Academic Achievements
Academic Achievements

SCI、EI、ISTP Retrieve papers

  1. Li Mingzhe, Liu Yuhong, Su Shizhong et al. Multi-point forming: a flexible manufacturing method for a 3-d surface sheet, Journal of Materials Processing Technology.1999,87: 277~280（SCI、EI收录）

  2. Zhongyi Cai，Mingzhe Li. Optimum path forming technique for sheet metal and its realization in Multi-point forming，Journal of Materials Processing Technology, 2001. 2, 110:136~141.（SCI、EI收录）

  3. Zhong-yi Cai, Ming-zhe Li. Multi-point forming of three-dimensional sheet metal and the control of the forming process, International Journal of Pressure Vessels and Piping, 2002,79(4): 289~296（SCI、EI收录）

  4. M. Z. Li, Z. Y. Cai, Z. Sui, Q.G. Yan. Multi-point forming technology for sheet metal, Journal of Materials Processing Technology, 2002, 129(1-3):333~338（SCI、EI、ISTP收录）

  5. Zhong-yi Cai, Ming-zhe Li. Smoothing finite-element technique for the processing of discrete measured data, Measurement, 2003,33(1): 47~53（SCI、EI收录）

  6. Zhong-Yi Cai, Ming-Zhe Li. Finite element simulation of Multi-point sheet forming process based on implicit scheme，Journal of Materials Processing Technology，2005, 161(3): 449~455（SCI、EI收录）

  7. Su Shizhong, Li Mingzhe, Hiroshi Takahashi. Prediction of plastic anisotropy in aluminum extruded tubes by finite element polycrystal model, Chinese Journal of Mechanical Engineering, 2001, 14 (1): 18~21（EI收录）

  8. Cai Zhongyi, Li Mingzhe, Feng Zhaohua. Theory and method of optimum path forming for sheet metal, Chinese Journal of Aeronautics, 2001, 14(2): 118~122（EI收录）

  9. Cai Zhongyi, Li Mingzhe, Cui Xiangji. Numerical method for prediction of net shaped blank in sheet metal Multi-point forming, Chinese Journal of Mechanical Engineering, 2002,15(4):314~318（EI收录）

  10. Pei Yongsheng, Li Mingzhe, Li Xue, Sui Zhen. Numerical simulation of wrinkle phenomenon during Multi-point forming process of shallow rectangle cup, Journal of Harbin Institute of Technology (New Series), 2004,11(3): 300~304（EI收录）

  11. Li Mingzhe, Liu Chunguo, Su Shizhong. Research on a flexible forming system of sheet metal，IFAC 5th Symposium on Low Cost Automation，1998:TS6-1~4 (ISTP收录)

  12. Li Mingzhe, Cai Zhongyi, Liu Chunguo. Study on residual stress in repeated multi-point forming of sheet metal, Chinese Journal of mechanical engineering, 2000,36 (1): 52 ~ 56 (EI)

  13. Gu.Z.,Yang.S.;Kou.S.;Zhao.Y.; Fracture splitting technology of automobile engine connecting rodInternational Journal of Advanced Manufacturing Technology2005，2（EI检索）

  14. Yang Shenhua, Kou Shuqing andDeng chunping ． Research and application of precision roll-forging taper-leaf spring of vehicle． Journal of Materials Processing Technology,65(1997)(SCI检索、EI检索)

  15. Yang Shenhua, Zhang Chi, Kou Shuqing, et al. Status quo and development trend of manufacturing technology of assembled camshaft. Internal combustion engine engineering, 2004, No.2 (EI retrieval)

  16. Kou Shuqing, Yang Shenhua. Key techniques of large deformation finite element numerical simulation based on spline surface description. Chinese Journal of mechanical engineering, 2000, No.10 (EI retrieval)

  17. Li Shuhui, Li Mingzhe, Chen Jianjun. Numerical simulation of multi-point segmented sheet metal forming, Chinese Journal of mechanical engineering, 2000,36 (8): 88 ~ 91 (EI)

  18. Zhang Aiwu, Li Mingzhe, Hu Shaoxing. A stereo precise matching method for 3D surface vision measurement, optical technology, 2001,27 (2): 115 ~ 117 (EI)

  19. Zhang Ai Wu, Sui Zhen, Hu Shao Xing, Chen Jian Jun, Li Ming Zhe. Vision system calibration method based on neural network, optical technology, 2001,27 (4): 302 ~ 305 (EI)

  20. Cai Zhongyi, Li Mingzhe, Fu Wenzhi. Finite element analysis of sheet metal multi-point forming process, Chinese Journal of computational mechanics, 2002,19 (3): 1458 ~ 1461 (EI)

  21. Fu Wenzhi, Li Mingzhe, Cui Xiangji, et al. Dynamic simulation of reversing process of micro hydraulic directional valve, Journal of Harbin Institute of technology, 2002, 34 (4): 489 ~ 492 (EI)

  22. Fu Wenzhi, Li Mingzhe, Cui Xiangji. Study on the suction characteristics of quasi constant force electromagnet, Chinese Journal of mechanical engineering, 2003, 39 (7): 119 ~ 122 (EI)

  23. Yan Qingguang, Li Mingzhe, Cui Xiangji. Research on measurement and control method of springback in multi-point forming, materials science and technology, 2004,12 (4): 364 ~ 367 (EI)

  24. Sun Gang, Li Mingzhe, Cai Zhongyi, Fu Wenzhi. Research on the relationship between the processing mode and the workpiece indentation in multi-point forming, materials science and technology, 2004,12 (4): 360 ～ 363 (EI)

  25. Song Xuesong, Cai Zhongyi, Li Mingzhe. Numerical simulation of indentation and analysis of limit forming force in multi-point forming, materials science and technology, 2004,12 (4): 368 ～ 371 (EI)

  26. Li Mingzhe, Pei Yongsheng, Xu Jianli. Numerical simulation of multi-point forming process of sheet metal, materials science and technology, 2004,12 (4): 379 ～ 382 (EI)

  27. Zhou Chaohui, Cai Zhongyi, Li Mingzhe. Stretch forming process and numerical simulation of multi point die, Journal of Jilin University (Engineering Edition), 2005,35 (3): 287 ~ 291 (EI)

  28. Li Xue, Li Mingzhe, Cai Zhongyi. Effect of elastic medium on forming quality in multi-point forming, Journal of Harbin Institute of technology, 2005, 37 (2): 194 ~ 19 (EI)

International papers

1.Li Mingzhe,Liu Chunguo, Chen Qingmin. Research on multi-point forming of three-dimensional sheet metal parts, 6th International Conference on Technology of Plasticity, Nuremberg, Germany, 1999:189~194

2.Li Mingzhe, Su Shizhong, The flexible system for manufacturing three dimensional curved sheet with technology of multi-point forming, Proceedings of 1999 International Conference on Advanced Manufacturing Technology, Science Press New York, Ltd.1999：294~297

3.Li Mingzhe,Liu Chunguo, Cai Zhongyi. A dieless forming technique for sheet metal, '99 international Conference on Science and Technology, Seoul,Korea，1999

4.Zhang Aiwu, Li Mingzhe, Hu Shaoxing. 3D measurement technology based on computer vision.Transactions of The Chinese Society of Agricultural Engineering.2001,17(1): 32~37

5.Zhang Aiwu, Li Mingzhe, Hu Shaoxing. 3D measurement technology based on computer vision. The First International Conference on Mechanical Engineering，ICME2000, 480

6.Mingzhe LI, Wenzhi FU, YongshengPEI and Zhen SUI. 2000KN multi-point forming press and its application to the manufacture of high-speed trains，Advanced Technology of Plasticity 2002, Proceedings of the 7th ICTP, Yokohama, Japan, Oct., 2002, 2:979~984

7.Liu Chunguo, Li Mingzhe, Cai Zhongyi. Rapid manufacturing system for sheet metal parts and its application, Proceedings of the 6th International Conference on Frontiers of Design and Manufacturing, Science Press & Science Press USA Inc, June 2004, Xi’an China, 708~709

8.Wenzhi Fu, Mingzhe Li,Chunguo Liu et al. A study on quasi-constant force electromagnet, The 4th International Power Electronics and Motion Control Conference August 14~16 2004 Xi’an China Vol1, 310~315

9.C.G. Liu, M.Z.Li, X.J.Cui, Spring-back self adaptive control in multi-point forming of sheet metal, Proceeding of the 1st International Conference on New Forming Technology, ICNFT, Sep.6-9, 2004, Harbin, 303~308

10.Q.C.Yan, M.Z.Li, Z.Y.Cai, A new approach to digitized manufacturing of sheet metal part based on integration of reverse engineering and multi-point forming, Proceeding of the 1st International Conference on New Forming Technology, ICNFT, Sep.6-9, 2004, Harbin, 309~314

11.Zhong-Yi Cai, Ming-Zhe Li, Xue-Song Song. Numerical analysis of multi-point forming process of sheet metal, Proceedings of the 8th International Conference on Technology of Plasticity, Verona, Italy, October 9-13, 2005, 565~566

12.Ming-Zhe Li, Zhong-Yi Cai, Chun-Guo Liu, Wen-Zhi Fu. Recent developments in multi-point forming technology,Proceedings of the 8th International Conference on Technology of Plasticity, Verona, Italy, October 9-13, 2005), 707~708

13.Zhen Sui, Ming-Zhe Li, Chun-Guo Liu, Xiang-Ji Cui. Working surface design and control in multi-point forming of sheet metal,Proceedings of the 8th International Conference on Technology of Plasticity, Verona, Italy, October 9-13, 2005), 581~582 Top

Other published papers since 2000

● 2000年

  1. Li Mingzhe, lishuhui, Chen Jianjun, et al. Numerical simulation of different process methods of sheet metal multi-point forming, China Mechanical Engineering, 2000,11 (9): 1042-1046

  2. Cai Zhongyi, Li Mingzhe, liguangquan. Contact element method in metal forming numerical simulation technology, China Mechanical Engineering, 2000, 11 (8): 933-935

  3. Cai Zhongyi, Li Mingzhe, Chen Jianjun. Finite element method of surface modeling of multi-point forming basic body group, China Mechanical Engineering, 2000, 11 (11): 1260-1262

  4. Liu Chunguo, Li Mingzhe, Cai Zhongyi, et al. Research on multi-point closed-loop forming of large-scale three-dimensional plate parts, China Mechanical Engineering, 2000, 11 (12): 1326-1329

  5. Li Mingzhe, Yao Jianguo, Cai Zhongyi, lishuhui. Study on reducing rebound by multi-point repeated forming method, Journal of plastic engineering, 2000, 7 (1): 22-25

  6. Li Mingzhe, Fu Wenzhi, lixiangji, etc. development of multi-point forming prototype of sheet metal, Journal of Harbin University of technology, 2000, 32 (4):62-64

  7. Zhang Aiwu, Li Mingzhe, Hu Shaoxing. Visual workpiece detection technology based on wavelet transform, Journal of Harbin University of technology, 2000, 32 (4):4-6

  8. Chen Jianjun, Li Mingzhe. Application of multi-point sectional forming technology, Journal of Harbin University of technology, 2000, 32 (4):65-67

  9. Cai Zhongyi, Li Mingzhe, Chen Jianjun. Special software and key technologies for numerical simulation of sheet metal multi-point forming implicit algorithm, Journal of Harbin University of technology, 2000, 32 (4): 82-85

  10. Su Shizhong, Li Mingzhe, Chen Jianjun. Finite element polycrystalline model for simulating the multi-point forming process of aluminum plate, Journal of Harbin University of technology, 2000, 32 (4):117-119

  11. Li Shuhui, Li Mingzhe, Cai Zhongyi, Yao Jianguo. Numerical simulation of multi-point bending process and rebound phenomenon of plates, Journal of agricultural machinery, 2000, 31 (1): 112-115

  12. Li Mingzhe, sushizhong, chenqingmin, et al. The finite element polycrystalline model for predicting the influence of different loading modes on the multi-point bending of strip. Journal of Jilin University of technology, 2000 (3):25-29

  13. Li Mingzhe, Chen Jianjun, Sui Zhen. Multi point forming technology of three-dimensional surface of sheet metal, new technology and new technology, 2000 (10): 27-29

  14. Li Mingzhe, Liu Chunguo, Chen Qingmin. Research on die free multipoint forming of large-scale three-dimensional plate parts, EDM and die, 2000 (2): 42-44

  15. Koushuqing, yangshenhua, huangliangju, et al. Application of constraint split method in cold forging of high precision straight tooth cylindrical gears. Journal of Jilin University of Technology (Academic list), 2000, No.2

  16. Koushuqing, yangshenhua, Jin civilization. Application of B-spline surface in mold cavity description and 3D mesh generation. China Mechanical Engineering, 2000, No.11

  17. Ke Shuqing, yangshenhua, Fu Peifu. Research on the cold forging process of high precision straight tooth cylindrical gear. Forging technology, 2000, No.5

  18. Ke Shuqing, Fu Peifu, yangshenhua, et al. Numerical simulation of three-dimensional elastoplastic of gear precision forging. Journal of Harbin University of technology, 2000, No.4

  19. Yang Shenhua, Ke Shuqing, Feng Zhaohua. A numerical technique for effectively processing the measurement data of plane vector field. China Mechanical Engineering, 2000, No.3

  20. Yang Shenhua, Ke Shuqing, Fu Peifu. Cad/cam integrated system of precision roll forging die for variable section leaf spring. Automotive engineering 2000, No.1

  21. Yang Shenhua, Ke Shuqing, Gu Zhengwei, et al. New technology of engine link cracking processing. Journal of Harbin University of technology 2000, No.3

  22. Li Shuhui, Li Mingzhe, Chen Qingmin. Research on numerical simulation technology of sheet metal multi-point forming, automotive technology, 2000 (1): 31-34

  23. Li Mingzhe, sushizhong, Liu Chunguo. Die free multi-point forming technology, computer aided design and manufacturing, 2000 (4): 10

  24. Cheng Wanjun, Li Mingzhe. Experimental study on the die free multipoint forming of saddle shaped surface of sheet metal, die industry, 2000 (1):50-51 Top

● 2001年

  1. Su Shizhong, Li Mingzhe, Li Dongping, et al. Prediction of texture and plastic anisotropy of FCC metal after stamping deformation by using finite element polycrystalline elastoplastic model, Acta metallurgica Sinica, 2001,37 (5): 531 ~ 536

  2. Chen Jianjun, Li Mingzhe, Sui Zhen, et al. Optimization design of transition zone in sheet metal segmented forming based on genetic algorithm, Journal of Jilin University of Technology (NATURAL SCIENCE EDITION), 2001 (2): 12 ~ 16

  3. Cheng Wanjun, Li Mingzhe, Chen Jianjun. Study on forming limit and springback of multi-point die forming of sheet metal, Acta agriculturalis Sinica, 2001, (3): 96 ~ 98

  4. Chen Jianjun, Li Mingzhe, Sui Zhen. Application of genetic algorithm in design of transition zone of sectional forming, forging technology, 2001 (4): 34 ~ 36

  5. Cai Zhongyi, Li Jie, Li Mingzhe. Static implicit finite element analysis and program design of sheet metal forming, metal forming process, 2001,19 (4): 15 ~ 17,30

  6. Cai Zhongyi, Li Jie, Li Mingzhe. Numerical simulation of sheet metal forming process based on static implicit method, Chinese Journal of agricultural machinery, 2001,32 (6): 110 ~ 113

  7. Cai Zhongyi, Li Mingzhe, Yan Xueping, et al. Numerical simulation of multi-point forming process of sheet metal, Journal of plastic engineering, 2001,8 (4): 47 ~ 51

  8. Kou Shuqing, Yang Shenhua, Huang Liangju, et al. Consistent description of die cavity, mesh generation and contact search in numerical simulation of bulk forming. Journal of natural science of Jilin University of Technology (Academic list) 2001, No.1

  9. Kou Shuqing, Yang Shenhua, Deng Chunping, et al. Pyrolysis technology -- the latest technology of engine connecting rod manufacturing. China Mechanical Engineering, 2001, No.7

  10. Kou Shuqing, Yang Shenhua, Zhao Yong. Numerical simulation analysis of cold precision forging process of spur gear. Acta AGRICULTURAE Sinica Sinica 2001, No.1

  11. Kou Shuqing, Yang Shenhua, Huang Liangju. Research on precision roll forging technology of closed groove of machine driven plowshare. Hot working technology, 2001, No.4

  12. Kou Shuqing, Jin Wenming, Gu Zhengwei, et al. Latest technology and development trend of internal combustion engine connecting rod manufacturing. Internal combustion engine engineering, 2001, No.1,

  13. Li Dongping, Sui Zhen, Cai Zhongyi, Li Mingzhe. Review of sheet metal multi-point forming technology, Journal of plastic engineering, 2001,8 (2): 46 ~ 48

  14. Cheng Wanjun, Li Mingzhe, Chen Qingmin. Experimental study on Dieless Forming of 3D curved surface of l2y2 aluminum plate, China Mechanical Engineering, 2001,12 (5): 207 ~ 208

  15. Zhang Aiwu, Yan Xueping, Hu Shaoxing, Li Mingzhe. Stereo precise matching method for free form surface vision measurement, infrared and laser engineering, 2001,30 (2): 87 ~ 90

  16. Zhang Aiwu, Li Mingzhe, Hu Shaoxing. Research on key technology of 3D surface measurement based on stereo vision, systems engineering and electronic technology, 2001,23 (10): 83 ~ 87 Top

● 2002年

  1. Cai Zhongyi, Li Mingzhe, Chen Qingmin. Numerical simulation and application of friction contact problems in large deformation, Journal of applied mechanics, 2002,19 (2): 1-4

  2. Cai Zhongyi, Li Mingzhe, Yan Qingguang. Theory and application of multi-point flexible forming of sheet metal, Journal of Applied Science, 2002,20 (2): 202-206

  3. Cai Zhongyi, Li Mingzhe, et al. Calculation method of sheet and shell shaped parts based on triangular mesh, Journal of Jilin University (Engineering Edition), 2002,32 (2):1-6

  4. Fu Wenzhi, Li Mingzhe, liuchunguo, etc.2000kn sheet multi-point forming machine and its profile adjustment error, forging press, 2002, 37 (3): 12-13

  5. Yan Qingguang, Li Mingzhe, Cai Zhongyi. Finite element analysis and optimization design of frame structure of C-type multi-point forming press, forging press, 2002,37 (3): 44-47

  6. Sui Zhen, Li Mingzhe, Cai Zhongyi, peiyongsheng, Cui Xiangji. A new method of directly controlling step motor by computer serial port, application of electronic technology, 2002,28 (8): 26-28

  7. Fu Wenzhi, Li Mingzhe, Cai Zhongyi, et al. Numerical simulation of dynamic liquid pressure of micro hydraulic reversing valve, Journal of Jilin University (Engineering Edition), 2002,32 (3): 20-25

  8. Peiyongsheng, yanxueping, Li Mingzhe, etc. LS DYNA secondary development software for numerical simulation of multi-point forming, Journal of Jilin University (Engineering Edition), 2002,32 (3): 26-29

  9. Li Mingzhe, Cai Zhongyi, Cui Xiangji. Multi point forming technology of plate and shell parts, new technology and new technology, 2002,8:33-35

  10. Cai Zhongyi, Li Mingzhe, lixiangji. Static implicit method for numerical analysis of sheet metal forming rebound, China Mechanical Engineering, 2002,13 (17): 1458-1461

  11. Cai Zhongyi, Li Mingzhe. Finite element algorithm for graphics and image reproduction, Journal of Chinese image graphics, 2002,7 (9): 882-887

  12. Chen Jianjun, Sui Zhen, Li Mingzhe. Development of cad/cam integrated system for multi-point forming, forging press machine, 2002, 37 (4): 66-67

  13. Fu Wenzhi, Li Mingzhe, lidongcheng. 630kn sheet multi-point forming press research, heavy machinery, 2002244 (4): 26-28

  14. Li Mingzhe, Fu Wenzhi, yanxueping. Sheet metal die free forming press, new technology and new technology, 2002,7:36-37

  15. Fu Wenzhi, Li Mingzhe, Chen Jianjun. Numerical simulation of quasi permanent force electromagnets, China Mechanical Engineering, 2002, 13 (16): 1351-1353

  16. Fu Wenzhi, Li Mingzhe, yanqingguang, lixiangji. 630kn multi-point forming press, Journal of Jilin University (Engineering Edition), 2002, 32 (4): 26-30

  17. Li Mingzhe, Fu Wenzhi, Cui Xiangji. Multi point forming of three-dimensional surface of sheet metal, the Eighth National Annual Conference on plastic processing and the Symposium on advanced plastic processing technology of Chinese in the world, Beijing, 2002,11.226-230

  18. Ke Shuqing, yangshenhua, Jin civilization. Study on boundary boundary boundary boundary constraint processing technology of 3D complex forming numerical simulation. China Mechanical Engineering 2002, No.2

  19. Sui Zhen, Li Mingzhe, Cai Zhongyi, Liu Chunguo. The overall design and key technology of multi-point forming control system, Journal of Jilin University (Engineering Edition), 2002, 32 (4): 20-25

  20. Peiyongsheng, Li Mingzhe, Sui Zhen, Fu Wenzhi. Serial communication between industrial control computer and MCU master-slave distributed control system, computer development and application, 2002, 15 (2): 2-3

  21. Peiyongsheng, Li Mingzhe, Chen Jianjun, yanqingguang, Guo Wei, malijun. Numerical simulation of the multi-point forming indentation of box shaped parts, forging press, 2002, 37 (5): 51-53

  22. Peiyongsheng, Li Mingzhe, Chen Jianjun, Fu Wenzhi. Analysis of the crack defects in multi-point forming of box shaped parts, forging and pressing machinery, 2002, 37 (4): 25-26

  23. Zhang Aiwu, Li Mingzhe, hushaoxing, chenqingmin. Surface measurement system of plate parts based on computer vision, Journal of Chinese graphics, 2002,7 (2): 190-195

  24. Cui Xiangji, Cai Zhongyi, Li Mingzhe. The theory and method of multi-point flexible forming of three-dimensional surface parts of sheet metal, Journal of science and technology, 2002,23 (4): 521-524

  25. Li Mingzhe, Cai Zhongyi, Cui Xiangji. Multipoint forming -- new technology of flexible forming of metal sheet metal, metal forming process, 2002,20 (6): 5-9

  26. Sui Zhen, cuixiangji, Cai Zhongyi, Li Mingzhe. Development of control system of sheet multi-point forming equipment, forging machine, 2002,37 (6): 11-13 Top

● 2003年

  1. Pei Yongsheng, Yan Xueping, Li Mingzhe. Numerical simulation of multi-point forming defects of square box, Journal of Jilin University (Engineering Edition), 2003, 33 (1): 22 ~ 27

  2. Cai Zhongyi, Li Mingzhe, Fu Wenzhi, analysis and control of indentation defects in sheet metal multi-point forming, forging technology, 2003,28 (1): 16 ~ 19

  3. Cai Zhongyi, Li Mingzhe. Smoothing finite element method for surface reconstruction from scattered data, Acta Sinica Sinica, 2003,14 (4): 838 ~ 844

  4. Sui Zhen, Liu Chunguo, Cui Xiangji, Li Mingzhe, Liu Wei. Development of feeding device for Sectional Multi-point forming, Journal of Jilin University (Engineering Edition), 2003, 33 (1): 17 ~ 21

  5. Pei Yongsheng, Li Mingzhe, Chen Jianjun, et al. Treatment of boundary conditions for multi-point forming of box parts, forging technology, 2003,28 (1): 24 ~ 26

  6. Chen Xidi, Cai Zhongyi, Li Mingzhe, Ma Lijun. Finite element analysis of the installation template of the basic body group in the multi-point forming press, forging equipment and manufacturing technology, 2003,38 (1): 65 ~ 67

  7. Cai Zhongyi, sun Xihong, Li Mingzhe, Feng Zhaohua. Fairing finite element method for reconstruction and differentiation of discrete measurement data. Journal of Jilin University (Engineering Edition) 2003, 33 (2): 64 ~ 68

  8. Pei Yongsheng, Li Mingzhe, Cai Zhongyi, Fu Wenzhi, Sui Zhen. Theoretical analysis and Realization of multi-point forming with variable path for sheet metal, Acta agriculturalis Sinica, 2003, 34 (2): 114 ~ 116

  9. Pei Yongsheng, Li Mingzhe, Chen Jianjun, Sui Zhen, Zhang dongjuan. Treatment of boundary conditions for multi-point forming of box parts, forging technology, 2003, 1:24 ～ 24

  10. Li Dongping, Cai Zhongyi, Li Guangquan. Rigid plastic finite element analysis of hemispherical bulging process, forging technology, 2003, 1:38 ～ 41,58

  11. Jin Wenming, Yang Shenhua, Kou Shuqing, et al. New series hydraulic die forging hammer and its application. Automotive technology, 2003, No.11

  12. Deng Chunping, Yang Shenhua, Kou Shuqing. Experimental study on precision blanking process of automotive limit cam. Automotive technology and materials, 2003, No.8

  13. Sui Zhen, Liu Chunguo, Fu Wenzhi, Li Mingzhe. Leveling technology of basic body in multi-point forming equipment, forging equipment and manufacturing technology, 2003, 2:18 ～ 20

  14. Yan Qingguang, Li Mingzhe, Sui Zhen, Sun Gang, Ren Yongzheng. Application of 3D workpiece measuring and marking system in multi-point forming, new technology and new process, 2003, 5:12 ~ 14

  15. Sui Zhen, Chen Jianjun, Li Mingzhe. Special CAD / CAM software for multi-point forming of sheet metal, machinist (cold working), 2003, 6:81 ～ 82

  16. Peng Linfa, Li Mingzhe, Cai Zhongyi, Ma Lijun. Surface expanding method in sheet metal forming, Journal of plastic engineering, 2003, 4:30 ~ 33

  17. Zhang dongjuan, Su Shizhong, Li Mingzhe. Unfolding method of 3D surface workpiece in dieless multi-point forming, Journal of plastic engineering, 2003, 4:34 ~ 37

  18. Liu Chunguo, Sui Zhen, Li Mingzhe. Fuzzy control method for multi point closed loop forming of sheet metal, Journal of plastic engineering, 2003, 5:1 ~ 4

  19. Yan Qingguang, Li Mingzhe, Sui Zhen. Application of reverse engineering in multi-point forming of sheet metal, Journal of plastic engineering, 2003, 5:5 ~ 8

  20. Chen Xidi, Cai Zhongyi, Li Mingzhe. Numerical simulation of springback in sheet metal multi-point forming without blank holder, Journal of plastic engineering, 2003, 5:9 ~ 13

  21. Cai Zhongyi, Li Mingzhe, song Xuesong. Analysis and control of wrinkling in multi-point forming without blank holder, Journal of plastic engineering, 2003, 5:14 ~ 19

  22. Li Xue, Li Mingzhe, Cai Zhongyi. Numerical simulation of multi-point forming using elastic medium, Journal of plastic engineering, 2003, 5:20 ~ 24

  23. Sun Gang, Fu Wenzhi, Li Mingzhe, Cai Zhongyi. Application of image mosaic in 3D measurement of plate parts, Journal of plastic engineering, 2003, 5:30 ~ 34

  24. Fu Wenzhi, Li Mingzhe, Sui Zhen, Liu Qiang. Development of 200kn multi-point forming press with rapid profile adjustment, Journal of plastic engineering, 2003, 5:46 ~ 48

  25. Liu Qiang, Fu Wenzhi, Li Mingzhe, Sun Gang. Finite element analysis and optimization design of frame structure of three beam four column multi-point forming press, Journal of plastic engineering, 2003, 5:49 ~ 52

  26. Sui Zhen, Liu Chunguo, Li Mingzhe, Cai Zhongyi. Development of control system for multi-point forming equipment with rapid profile adjustment, Journal of plastic engineering, 2003, 5:53 ~ 56

  27. Cai Zhongyi, Chen Xidi, Li Mingzhe, strength loss and stress concentration of circular hole densely distributed formwork, Journal of Jilin University (Engineering Edition), 2003, 4:16 ~ 20

  28. Fu Wenzhi, Li Mingzhe, Liu Chunguo, Pei Yongsheng, Sun Gang. Research on 100kN multi-point forming press and sectional forming technology, Acta agriculturalis Sinica, 2003, 34 (5): 186 ~ 188

  29. Fu Wenzhi, Li Mingzhe, Cui Xiangji. Study on the suction characteristics of quasi constant force electromagnet, Chinese Journal of mechanical engineering, 2003, 39 (7): 119 ~ 122

  30. Chen Jianjun, Li Mingzhe, Yan Qingguang, Pei Yongsheng. Research on Key Technologies of finite element numerical simulation of segmented multi-point forming process, China Mechanical Engineering, 2003, 16:1364 ~ 1367

  31. Yan Qingguang, Li Mingzhe, Li Dongcheng. Research on 3D data registration method in multi-point forming inspection, China Mechanical Engineering, 2003, 19:1648 ~ 1651

  32. Liu Chunguo, Li Mingzhe, Sui Zhen. Research on surface description method of basic body group in multi-point closed-loop forming, China Mechanical Engineering, 2003, 14 (24): 2071 ~ 2073

  33. Yang Shenhua, Kou Shuqing, Zhao Yong, et al. Numerical simulation of cold closed die forging process of bevel gear. Acta AGRICULTURAE Sinica Sinica 2003, No.2

  34. Kou Shuqing, Yang Shenhua, Deng Chunping. Numerical simulation and experimental study on cold precision forging of car bevel gear. Journal of Jilin University, 2003, No.4

  35. Kou Shuqing, Yang Shenhua, Dong Lei. Numerical simulation analysis of cold block forging of straight bevel gear. China Mechanical Engineering, 2003, No.20

  36. Song Xuesong, Cai Zhongyi, Li Mingzhe, Sui Zhen. Modeling method of basic body forming surface in numerical simulation of multi-point forming, forging equipment and manufacturing technology, 2003, 38 (6): 73 ~ 75

  37. Li Xue. Numerical simulation and experimental study on multi-point forming of saddle shaped curved blank holder, China Mechanical Engineering, 2003, 14 (Supplement) Top

● 2004年

  1. Liu Chunguo, Cai Zhongyi, Li Mingzhe. Formation and control of indentation in multi-point forming, Journal of Jilin University (Engineering Edition), 2004, 1:91 ~ 96

  2. Chen Jianjun, Li Mingzhe, Wang Chengtao, Liu Wei. Sectional Multi-point Forming Technology and its application for sheet metal parts, forging equipment and manufacturing technology, 2004, 39 (1): 31 ~ 33

  3. Fu Wenzhi, Li Mingzhe, Li Dongping, Sun Gang, Jin Xin. Numerical simulation of hydraulic poppet valve, machine tools and hydraulics, 2004,2,44 ～ 46

  4. Song Xuesong, Cai Zhongyi, Li Mingzhe. Numerical simulation of forming force in multi-point sheet metal forming, Journal of Jilin University (Engineering Edition) 2004, 34 (2): 226 ~ 231

  5. Fu Wenzhi, Li Mingzhe, Yan Qingguang, Sui Zhen, Jin Xin. Research on repeated forming technology of multi-point forming press, Acta mechanization Sinica, 2004, 35 (2): 126 ~ 128

  6. Cai Zhongyi, Guo Wei, Li Mingzhe. Blank calculation and deformation inverse analysis of sheet metal parts with three-dimensional curved surface, China Mechanical Engineering, 2004, 15 (8): 713 ~ 716

  7. Yan Qingguang, Li Mingzhe, Fu Wenzhi. Integration of multi point forming and reverse engineering based on digital technology, Chinese Journal of agricultural machinery, 2004,35 (4): 128 ～ 131

  8. Liu Chunguo, Sui Zhen, Fu Wenzhi, Li Mingzhe. Nonparametric model and adaptive control of sheet metal multi-point forming process, control engineering, 2004,11 (4): 306 ～ 308

  9. Fu Wenzhi, Li Mingzhe, Li Dongping, Chen Xue. The latest development of multi-point forming press and forming technology, mechanical science and technology, 2004,23 (12): 1499 ~ 1502

  10. Kou Shuqing, Yang Shenhua, Zhao Yong, et al. Engine connecting rod splitting processing and its key technology. Journal of Jilin University, Engineering Edition (Academic list) 2004, No.1

  11. Zhang Chi, Yang Shenhua. Mechanism and strength of knurled connection of assembled camshaft. Journal of plastic engineering, 2005, No.1

  12. Kou Shuqing, Yang Shenhua, Jin Minghua. Connecting rod splitting technology and its application. Mechanical strength 2004, No.5

  13. Kou Shuqing, Yang Shenhua, Zhao Yong, et al. Engine assembled camshaft: a new competitive technology. Chinese Journal of mechanical engineering, 2004, No.6

  14. Zhang Chi, Yang Shenhua, Kou Shuqing. Production technology and application of assembled camshaft. Automotive technology, 2004, No.1

  15. Wei Donglai, Kou Shuqing, Yang Shenhua. Dynamic simulation and formability analysis of car panel drawing. Automotive engineering, 2004, No.4

  16. Yang Shenhua, Kou Shuqing, Xu Chenglin. Research on cold block forging of planetary and axle gear of car differential. Forging technology, 2004, No.1 Top

● 2005年

  1. Fu Wenzhi, Li Mingzhe, Deng Yushan. Numerical simulation of magnetic field and traction force of DC electromagnet, Chinese Journal of agricultural machinery, 2005, 36 (2): 100 ~ 103

  2. Zhang Chi, Li Yue Ying, Yang Shen Hua. Research on materials and assembly technology of assembled hollow camshaft cam. Materials science and technology, 2005, No.1

  3. Chen Xue, Fu Wenzhi, Li Mingzhe. Forging equipment and manufacturing technology, research and development of nutrition block forming machine, forging equipment and manufacturing technology, 2005,40 (1): 43 ～ 45

  4. Yang Shenhua, Kou Shuqing, Zheng Qifeng, et al. Engine connecting rod splitting process and equipment. Automotive technology, 2005, No.2 Top

Works since 2000

  1. Li Mingzhe, Cai Zhongyi. Special forming of plate and tube, volume of plastic forming engineering of materials, 2005

  2. Li Mingzhe. Special forming and joining technology, higher education press, 2005. Top



       

 

Scientific Research
Research Direction Research Project Academic Achievements Award Patents
Home  |   About  |   Organization  |   Scientific Research  |   Teaching Staff  |   Personnel Training  |   Exchange and Cooperation  |   Scientific Research  |   Contact Us  |   中文

copyright © Institute of roll forging technology, Jilin University

Mechanical materials Museum, 5988 Renmin Street, Changchun, China postcode: 130022